V6 F-Body.com

V6 F-Body.com (https://www.v6f-body.com/index.php)
-   F-Body of the Season! (https://www.v6f-body.com/forumdisplay.php?f=36)
-   -   FBOTS Spring 2015 Voting (https://www.v6f-body.com/showthread.php?t=6145)

xpbr2000 07-16-2015 03:10 PM

FBOTS Spring 2015 Voting
Even though there are only 2 entries this season i'm going ahead and running this one so there will be time to do the next season in Aug.

Here are the member entries! pick your favorite!

the voting will end on the 31st

Good luck members!

Update: For users that are using Tapatalk app you must open this thread in your browser app to be able to cast your vote.

Tapatalk user please read this first

xpbr2000 07-16-2015 03:11 PM


Ok here is my 1991 Camaro Rs 3.1L V6 Automatic. It has 116,000 miles on the body and about 2,000 miles on the engine set up so far.

First let me say thanks for letting me share my car with you. Ive put alot of time, labor, and money into this car but its a dream car to me. Its fast, unique, and best of all I did all the work on it myself.

Drive train:

It has a TH350 Transmission
Deep aluminum fin pan
TCI Full manual reverse valve body
B&M Megashifter
Freakshow 3500 Stall Converter
External Trans cooler

The rear end is a stock 10 bolt housing
Richmond 3.73 ring and pinion gears
Alburn LSD
Moser 28 spline axles
Rear aluminum girdle with bearing supports
Drive shaft loop

Engine Department:

3.1L Block bored to .020 over
Speed pro hyper Pistons (FWD application)
Hastings moly rings
Roughly 9.6:1 CR
All custom headers and intake piping myself. Front facing tube headers.
The heads, intakes, and DIS ignition is off a 2002 3400 impala. So really it is a 3.1/3100 hybrid
Custom length pushrods
External crank trigger kit

I run a gm boost solinoid for the boost control via the stock 7730 ecm. $59 mask using Tunerpro RT
Also I use a slc-diy2 wideband o2 sensor kit for tuning though the 7730 ecm.
I have 2 step built into the stock 7730ecm also but rarly use it
Southbay 48lbs injectors
Walbro 255lph Fuel pump
Gm 3 bar map sensor

Power Adders
Borg Warner S366 Turbocharger
Godspeed 38mm wastegate with a 10psi spring
Large A2A intercooler (cant thing of the exact size off hand)
NOS Sniper Nitrous kit. Wet kit, I have not got to play with it much but its set up for turbo spool up only 35Hp then would disarm at arround 8psi via a hobbs switch.

KYB adjustables in the rear.
Soft stock struts in the front
Boxed LCA Custom welded myself.
SLP Line Lock kit
For racing (hosiers 28x10 slicks @14psi)

Autoguage 5 inch tach with external shift light
Autoguage 1 5/8 boost gauge
slc-diy2 wideband o2 sensor
The 2 step, nitrous, fans, and line lock are all switchable from the drivers seat.

Im sure im missing more but I have been playing with the car for quite some time.

For performance I racked in a 11.70@116mph last year as my best at Milan Dragway.

So far this year I have had a string of bad luck with the car but im close to getting in a fast pass. If i can just make a solid hit im sure a 11.60 or under would not be to hard to accomplish. Last week when i blew a head gasket i trapped 96Mph in the 1/8 mile. That is a new best for me by 4 MPH.

I love this car to death. Ive owned it since 2002 when i bought it with 33k miles on it. I was a senior in high school.

Thanks for looking at my car everyone! Here are some pics below for you all.

Engine shot as of last weekend

Some of the welding i did on the turbo flange

Not the best show car in the world but this is a race car at heart!

My Th350 swap here. Worked like a charm, i love it!

Car show last fall
<img src="https://scontent-lga1-1.xx.fbcdn.net/hphotos-xap1/t31.0-8/10633913_880085155345880_8075724875654798259_o.jpg " width="1024" height="710">

At the track

Yes that is a V6 that can easily wrinkle those 28 inch tall slicks at 14psi

Cant forget the N20

On Drs

Thanks again for letting me share the car.

xpbr2000 07-16-2015 03:12 PM


2001 Camaro V6
YouTube: http://www.youtube.com/user/dereksimon07
Berger Panel
Cardinal Red Camaro Rear Insert
10 Spoke SS Wheels
Bowtie Center Caps
Sail Panel Triangle with Red Bowtie
Silver Camaro Break Decals
Front License Plate Re-location
Interior LEDs
Exterior LEDs
Y3F - Ground Effects Package
Blackbird Lighting Solution Retrofitted Headlights with Morimoto HID kit
3.42 Gears - Factory
Eaton Limited Slip Differential
BMR Shock Tower Brace
UMI Subframe Connectors
UMI Lower Control Arms
UMI Panhard Bar
SS Sway Bars w/ Poly Bushings and Endlinks
K&N Air Filter
Flowmaster 80 Series Muffler
Pacesetter Mid-Tube Headers & Y-Pipe
3" Full Exhaust
Slash Cut and Staggered Dual Exhaust Tips (Corsa clones)
Pioneer Head Unit
Pioneer Front and Sail speakers
Sony Speakers in Rear
Nitto 555 275/40/17
Nitto 555r 275/40/17 Drag Radials
Poly Bump Stops
Custom Street Tune
SJM Line Lock
SLP Fan Control Switch
Emblems Pros Ashtray Switchpate

fasteddi 07-19-2015 09:35 AM

Come on fellas....only 4 votes total?

xpbr2000 07-20-2015 09:35 AM


Originally Posted by fasteddi (Post 167374)
Come on fellas....only 4 votes total?

lol I haven't voted yet :dis:

xpbr2000 07-26-2015 01:48 PM

mark is up by 1 vote... only a few days left. last day for voting is the 31st.

bachert24 07-26-2015 08:18 PM

How do i vote?

Sent from my LG-ls990 using Tapatalk

fbodyrs96 07-26-2015 09:33 PM

You can only vote on the web

xpbr2000 07-27-2015 09:12 AM

yeah I may have to state that on the OP, in fact I will right now.

xpbr2000 07-27-2015 09:37 AM

created thread explaining 2 options to vote in polls and linked it on the OP

All times are GMT -4. The time now is 08:35 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
2008 - 2019 V6F-Body.com