V6 F-Body.com

V6 F-Body.com (https://www.v6f-body.com/index.php)
-   Imports (https://www.v6f-body.com/forumdisplay.php?f=85)
-   -   96 Honda Accord (https://www.v6f-body.com/showthread.php?t=6298)

wchiarizzio 12-31-2017 02:46 PM

Yea. Been there done that. Didn't like working on a 4th gen lol

Sent from my SM-G900V using Tapatalk

wchiarizzio 01-09-2018 04:46 PM

It's all back together again. Nothing really difficult. Once I had the parts it was back on the ground in 30 minutes.

Passenger output shaft seal is leaking again. So it's gonna boil down to carrier bearings in the diff. 4 seals, a reman axle, and a brand new axle.

Though one of the new axles brought on a new vibration. So I'm going to swap them out one at a time. No vibration before, so it was definitely one of the 2 new axles I got.

Sent from my SM-G900V using Tapatalk

xpbr2000 01-10-2018 10:23 AM

those should be balanced right?

wchiarizzio 01-17-2018 11:25 AM

Yea they should be. But the one box had a return sticker so....

Gonna just swap the passenger side at this point. Going to do that seal one more time with an oem seal. Not farfetched that aftermarket is out of spec.

If it still leaks after that it needs diff bearings in the trans.

Sent from my SM-G900V using Tapatalk

wchiarizzio 08-20-2018 11:42 AM

Gotta get some tires on these and clean them off and put some Honda center caps on. $100https://uploads.tapatalk-cdn.com/201...8cbb2e9c61.jpg

Sent from my SM-G930V using Tapatalk


All times are GMT -4. The time now is 02:02 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2008 - 2018 V6F-Body.com