3- TKOFORPRESIDENT'S 3x00 Build - Parts list/ Pictures

[tkoforpresident]

Main Parts List


This thread will document EVERY part purchased for my hybrid build, be it large or small. Pictures of these parts will be taken for reference and posted in the following pages.


*note this is a tentative list and will be updated/changed accordingly as new parts are purchased and plans develop.



- 3500 heads (Built with ls6 springs, ls1 seats)
- Stock 3500 1.6 ratio rocker arms
- Custom pushrods (in correlation to my custom cam) (.451/.456 - Dur @ .50 224/230- 109 LSA) (From Wot-tech)
- 3500 LIM
- 3400 UIM
- TCE 59 MM Throttle Body w/ red anodized throttle plate (From TCE)
- 3400 Fuel rail/fuel pressure regulator
- 28 # Multec II injectors (From WOT TECH)
- 3500 Valve Covers
- Longer Throttle Cable
- 3400 EGR block off plate (From WOT-TECH)
- 3x00 TCE Billet Thermostat Housing (from TCE)




Minor Parts
- Stainless Steel Allen Head 3400 bolt set (From TCE)
- Valve cover breather filter
- Billet "3400" Oil Filler Cap (from TCE)
- 3500 Spark Plugs
- 3500 Head Bolts
- 3500 LIM Bolts
- 185* 3500 Thermostat


Gaskets

- Stock 3.4 l32 (iron head) head gaskets
- Stock 3500 header gaskets
- 3400/3500 top end gaskets (metal fel-pro versions)


Miscellanious

- Coolant
- 5 qts Oil
- K&N Gold Class Oil Filter (part # 2001)
-


Many of these parts (and some of the stock pieces) will need to be modified in certain ways to make this hybrid work. For a list of modifications and their procedures/pictures see Sticky #4

[tkoforpresident]

Center: TCE 59mm 3400 Throttle Body

Left: TCE 3x00 Billet Thermostat housing

Top: 3x00 Valve Covers

Right: TCE Billet Oil Filler Cap

[tkoforpresident]

3500 Rocker Arms

[tkoforpresident]

3500 Lower Intake Manifold

[tkoforpresident]

3400 Upper Intake Manifold (next to 3.4 UIM)

[tkoforpresident]

EGR block off plate

[tkoforpresident]

28# Multec II Injectors