Go Back   V6 F-Body.com > Technical Discussion > Internal Engine
Internal Engine Pistons | Rods | Crankshafts | Rebuilds | Swaps

Reply
 
Thread Tools Display Modes
  #1  
Old 12-18-2008, 09:10 PM
Travis@gvperformance Travis@gvperformance is offline


 
Join Date: Aug 2008
Location: Grand Rapids, MI
Rank: Corporal
Posts: 718
Default 3.8l Torque specs

Found a nice link over on 3800pro that has a nice list of torque specs on random bolts and such. Here is the link for those interested.

Fastener Tightening Specifications



Application
Metric
English

Accelerator Control Cable Bracket Bolt
16 N-m
12 lb ft

Air Injection Check Valve Pipe to Exhaust Manifold
10 N-m
89 lb in

Air Injection Check Valve to Bracket Bolt
25 N-m
18 lb ft

Balance Shaft Driven Gear Bolt
22 + 70 N-m
16 + 70 lb ft

Balance Shaft Retainer Bolt
30 N-m
22 lb ft

Camshaft Position Sensor Bolt
10 N-m
89 lb in

Camshaft Sprocket Bolt
100 + 90 N-m
70 + 90 lb ft

Camshaft Thrust Plate Bolt
15 N-m
11 lb ft

Canister Purge Solenoid Valve Bracket Bolt
50 N-m
37 lb ft

Canister Purge Vacuum Switch Bolt
50 N-m
37 lb ft

Connecting Rod Cap Bolt
27 + 50 N-m
20 + 50 lb ft

Crankshaft Balancer Bolt
150 + 76 N-m
111 + 76 lb ft

Crankshaft Main Bearing Cap Bolt
40 + 110 N-m
30 + 110 lb ft

Crankshaft Main Bearing Cap Bolt (Side)
15 + 45 N-m
11 + 45 lb ft

Crankshaft Position Sensor Stud
30 N-m
22 lb ft

Crankshaft Rear Oil Seal Housing Bolt
15 + 50 N-m
11 + 50 lb ft

Cylinder Head Bolt
50 + 120 N-m
37 + 120 lb ft

Drive Belt Tensioner Bracket Bolt/Nut
50 N-m
37 lb ft

Drive Belt Tensioner Bracket Stud
6 N-m
53 lb in

EGR Valve Adapter Bolt/Stud
50 N-m
37 lb ft

EGR Valve Inlet Pipe Bolt
29 N-m
21 lb ft

EGR Valve Nut
30 N-m
22 lb ft

EGR Valve Outlet Pipe Bolt/Nut
29 N-m
21 lb ft

Engine Block Coolant Drain Plug
30 N-m
22 lb ft

Engine Block Oil Gallery Plug
30 N-m
22 lb ft

Engine Coolant Temp Sensor
23 N-m
16 lb ft

Engine Flywheel Bolt
15 + 50 N-m
11 + 50 lb ft

Engine Front Cover Bolt Stud
20 + 40 N-m
15 + 40 lb ft

Engine Lift Bracket Bolt/Nut./Stud
30 N-m
22 lb ft

Engine Mount Nut Lower
78 N-m
58 lb ft

Engine Mount Nut Upper
78 N-m
58 lb ft

Engine Oil Pressure Indicator Switch
16 N-m
12 lb ft

Engine Wiring Harness Heat Shield Nut/Bolt
10 N-m
89 lb in

Exhaust Crossover Heat Shield Nut
20 N-m
15 lb ft

Exhaust Crossover Pipe Bolt/Stud
18 N-m
13 lb ft

Exhaust Manifold Bolt/Nut
30 N-m
22 lb ft

Exhaust Manifold Stud (Inner)
30 N-m
22 lb ft

Exhaust Manifold Stud (Outer)
10 N-m
89 lb in

Fuel Injector Rail Nut
10 N-m
89 lb in

Fuel Injector Rail Stud
25 N-m
18 lb in

Fuel Injector Sight Shield Bracket Nut
30 N-m
22 lb ft

Generator Brace Bracket Bolt
50 N-m
37 lb ft

Heated Oxygen Sensor
42 N-m
31 lb ft

ICM Nut
50 N-m
37 lb ft

ICM Stud
6 N-m
53 lb in

ICM Wiring Harness Bolt
2 N-m
18 lb in

Idler Pulley Bolt
50 N-m
37 lb ft

Idler Pulley Bracket Bolt
30 N-m
22 lb ft

Lower Intake Manifold Bolt
15 N-m
11 lb ft

Oil Cooler Adapter Connector
50 N-m
37 lb ft

Oil Filter
30 N-m
22 lb ft

Oil Filter Adapter Bolt
15 + 50 N-m
11 + 50 lb ft

Oil Level Indicator Switch
20 N-m
15 lb ft

Oil Level Indicator Tube Nut
19 N-m
14 lb ft

Oil Pan Bolt
14 N-m
125 lb in

Oil Pan Drain Plug
30 N-m
22 lb ft

Oil Pump Cover Screw
11 N-m
98 lb in

Oil Pump Screen Bolt
15 N-m
11 lb ft

Power Brake Booster Heat Shield Nut
20 N-m
15 lb ft

Spark Plug
27 N-m
20 lb ft

Starter Motor Heat Shield Bolt
30 N-m
22 lb ft

Throttle Body Nut
10 N-m
89 lb in

Throttle Body Support Bolt
10 N-m
89 lb in

Throttle Body Support Stud
6 N-m
53 lb in

Timing Chain Dampener Bolt
22 N-m
16 lb ft

Upper Intake Manifold Bolt/Stud
10 N-m
89 lb in

Vacuum Solenoid Valve bolt (with NC1 California Emissions)
10 N-m
89 lb in

Valve Lifter Guide Retainer Bolt
30 N-m
22 lb ft

Valve Rocker Arm Bolt
15 + 90 N-m
11 + 90 lb ft

Valve Rocker Arm Cover Bolt
10 N-m
89 lb in

Water Outlet Bolt
27 N-m
20 lb ft

Water Pump Bolt
15 + 80 N-m
11 + 80 lb ft

Water Pump Pulley Bolt
13 N-m
116 lb in

Wiring Harness Shield Bolt/Nut
10 N-m
89 lb in



http://www.3800pro.com/lists/torquespecs.html
__________________
1997 Camaro RS- Fully built 3.8, a little nitrous and some other stuff
Owner- http://www.gvperformance.com

http://www.michiganvisalus.com

Last edited by freakv6; 12-18-2008 at 09:42 PM.
Reply With Quote
  #2  
Old 12-18-2008, 10:35 PM
tkoforpresident's Avatar
tkoforpresident tkoforpresident is offline
Conservo-Ninja
LS Supporting Member


 
Join Date: Aug 2008
Location: Buffalo, N.Y.
Rank: First Lieutenant
Posts: 2,401
Default

no love for the 3.4 ??
__________________

93 3.4 Firebird
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR, Custom Cam, Cloyes 2x Set, P&P Heads & Intakes, Ram Air Intake, Posi Rear w/3.42's and Disk Brakes, OBD-1 Swap.
Cam and Heads by 60Inclusive.com Tune By Wot-Tech.com
Reply With Quote
  #3  
Old 12-18-2008, 11:04 PM
freakv6's Avatar
freakv6 freakv6 is offline
The Smokin' Palm


 
Join Date: Aug 2008
Location: Scottsboro, AL
Rank: Lieutenant General
Posts: 5,627
Default

Getting info as we can. Any chance of you having access to all the 3.4 torque specs?
__________________

|freakv6 12:21| bone will let people take his car out for joy rides at the g14
|Pace 12:22| I vote we take the freak out for some joyrides.
|freakv6 12:22| you can pace, then maybe you can drive the car afterwords
Reply With Quote
  #4  
Old 12-18-2008, 11:31 PM
Will's Avatar
Will Will is offline
Ghost Patrol
LS PLUS Supporting Membership


 
Join Date: Aug 2008
Location: Rocky Mount, NC
Rank: Colonel
Posts: 4,375
Default

Nice I'll def need this later on!
Reply With Quote
  #5  
Old 12-19-2008, 12:49 AM
tkoforpresident's Avatar
tkoforpresident tkoforpresident is offline
Conservo-Ninja
LS Supporting Member


 
Join Date: Aug 2008
Location: Buffalo, N.Y.
Rank: First Lieutenant
Posts: 2,401
Default

are you referring to me or travis?

all i've got is what is in my haynes manual... i'm too lazy to put it together =)
__________________

93 3.4 Firebird
Pacesetter Headers, Flowmaster 80, Comp 1.6 RR, Custom Cam, Cloyes 2x Set, P&P Heads & Intakes, Ram Air Intake, Posi Rear w/3.42's and Disk Brakes, OBD-1 Swap.
Cam and Heads by 60Inclusive.com Tune By Wot-Tech.com
Reply With Quote
  #6  
Old 12-19-2008, 09:50 AM
freakv6's Avatar
freakv6 freakv6 is offline
The Smokin' Palm


 
Join Date: Aug 2008
Location: Scottsboro, AL
Rank: Lieutenant General
Posts: 5,627
Default

Way to support the forum........ I will see if i can put something together.
__________________

|freakv6 12:21| bone will let people take his car out for joy rides at the g14
|Pace 12:22| I vote we take the freak out for some joyrides.
|freakv6 12:22| you can pace, then maybe you can drive the car afterwords
Reply With Quote
  #7  
Old 12-19-2008, 10:04 PM
Will's Avatar
Will Will is offline
Ghost Patrol
LS PLUS Supporting Membership


 
Join Date: Aug 2008
Location: Rocky Mount, NC
Rank: Colonel
Posts: 4,375
Default

Quote:
Originally Posted by freakv6 View Post
Way to support the forum........ I will see if i can put something together.
If I can find my haynes manual, I'll help you out man
Reply With Quote

Go Back   V6 F-Body.com > Technical Discussion > Internal Engine
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT -4. The time now is 07:16 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2008 - 2018 V6F-Body.com