Go Back   V6 F-Body.com > Rides, Modifications & Racing > How To's
How To's Have a great writeup you would love to have posted? Post it here!

Reply
 
Thread Tools Display Modes
  #1  
Old 10-05-2013, 09:00 PM
SlasherVRGR's Avatar
SlasherVRGR SlasherVRGR is offline
Now with 2 extra cylinders!?


 
Join Date: Aug 2012
Location: NEPA
Rank: Sergeant Major
Posts: 1,486
Default Installing LCA relocation brackets

According to nearly everyone that i talked to, to install LCA relocation brackets i would need to grind or cut off a part of my e-brake cable brackets. FALSE!


This here simple easy to follow guide will have your fancy new relocation brackets in, in about an hour or 2 depending on how much beer you're drinking.

Things you'll need:

1. A hammer is always nice.. I personally used a small ball peen hammer and a plastic dead blow hammer.

2. You'll need a few sockets, i used a 19mm and a 13/16.

3. A 19mm wrench

4. A punch or chisel, and or a prying tool.

5. A jack and jackstands.


Okay to start things off here are a few helpful tips.

1. Take the wheels off.. its a pain and took me nearly 3 hours to do the passenger side with the wheel on. I did the drivers side in literally 25 mins with the wheel off.

2. Be very patient and don't be afraid to whack stuff with a hammer if needed :P

3. Don't keep the ebrake on while trying to install the brackets. It puts tension on the ebrake brackets and makes them harder to line up.

4. I started out on just ramps.. plenty of room, but cant really stay on the ramps if you have to take the wheels off. So don't use ramps.


Okay follow these easy steps lol

1. Jack the car up in the middle of the diff housing
2. Put some jackstands somewhere.. (i didn't use any :P)
3. Take your wheels off.
4. Use your 19 mm wrench and socket to take the LCAs off.
5. Use your 20 mm or 13/16th socket to unbolt your shocks.

6. This next part is the tricky part..

Your going to want to use your chisel or prying tool to pry the outside of the ebrake bracket outward.. here have a diagram



7. Okay so after you bend the bracket get your new relocation bracket and sandwich it in as shown in the diagram.
8. Put your shock back into place and put bolt on. Don't tighten yet however.
9. Put your spacer in and line everything up properly.
10. Slide bolt through.. don't be afraid to wiggle and smack it with a hammer. I put the bolt in from the brake side.
11. Tighten shock nut. Tighten lca bracket bolt and nut.
12. Repeat on the other side.

13. Do a sick ass no wheel hop burn out
__________________
93 Firebird M5 [RIP]
98 BPM Camaro M5 [RIP]
98 NBM Camaro Z28 A4 [LS1]

Mods: slp lid, borla adjustable catback, transgo kit, 3.73s, spohn tubular A arms..
Reply With Quote
  #2  
Old 10-05-2013, 09:29 PM
AUscorp1's Avatar
AUscorp1 AUscorp1 is offline


 
Join Date: Jul 2011
Location: Grant, AL
Rank: First Sergeant
Posts: 1,243
Default

Thanks for sharing with the pic. It is so easy to get caught up with the task and forget to do that.

Good to see it turned out well for you.
__________________
2001 Firebird Convertible, V6 4A, Y87, All Black, Daily Driver
32MM Front Sway Bar; Whisper Lid
Reply With Quote
  #3  
Old 10-05-2013, 10:12 PM
Bonemaro's Avatar
Bonemaro Bonemaro is offline
Now back to the good part.
Forum Owner


 
Join Date: Aug 2008
Location: Winder, GA
Rank: Four Star General
Posts: 9,372
Default

Stickying...
__________________

My 2000 Camaro SS/RS Wannabe. Proud non-member of PHK
Reply With Quote
  #4  
Old 10-06-2013, 12:13 AM
fbodyrs96's Avatar
fbodyrs96 fbodyrs96 is offline
LTZ Turbo


 
Join Date: Sep 2009
Location: Renton WA
Rank: Colonel
Posts: 4,173
Default

so why did you have to take the shock loose?
Reply With Quote
  #5  
Old 10-06-2013, 12:52 AM
SlasherVRGR's Avatar
SlasherVRGR SlasherVRGR is offline
Now with 2 extra cylinders!?


 
Join Date: Aug 2012
Location: NEPA
Rank: Sergeant Major
Posts: 1,486
Default

The brackets bolt to the shock also..

That's what the tabs are on them, the go behind the stock shock mount on the axle and the bolt on the shock goes through the bracket.

Probly for more rigidity and support.

Sent from my MB870 using Tapatalk 4
__________________
93 Firebird M5 [RIP]
98 BPM Camaro M5 [RIP]
98 NBM Camaro Z28 A4 [LS1]

Mods: slp lid, borla adjustable catback, transgo kit, 3.73s, spohn tubular A arms..

Last edited by SlasherVRGR; 10-06-2013 at 12:54 AM.
Reply With Quote
  #6  
Old 10-06-2013, 02:24 PM
SlasherVRGR's Avatar
SlasherVRGR SlasherVRGR is offline
Now with 2 extra cylinders!?


 
Join Date: Aug 2012
Location: NEPA
Rank: Sergeant Major
Posts: 1,486
Default

Oh yeah I forgot to mention the diagram is flipped for the passenger side :P

Sent from my MB870 using Tapatalk 4
__________________
93 Firebird M5 [RIP]
98 BPM Camaro M5 [RIP]
98 NBM Camaro Z28 A4 [LS1]

Mods: slp lid, borla adjustable catback, transgo kit, 3.73s, spohn tubular A arms..
Reply With Quote

Go Back   V6 F-Body.com > Rides, Modifications & Racing > How To's
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:45 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2008 - 2018 V6F-Body.com