Go Back   V6 F-Body.com > Rides, Modifications & Racing > How To's
How To's Have a great writeup you would love to have posted? Post it here!

Reply
 
Thread Tools Display Modes
  #1  
Old 09-05-2012, 02:36 PM
xpbr2000's Avatar
xpbr2000 xpbr2000 is offline
Droner
LS PLUS Supporting Membership
Administrator


 
Join Date: May 2010
Location: Mooreville, MS
Rank: Freaky Poster
Posts: 11,401
Default Leaky T-tops... fixed

Since i did my t-top conversion, i noticed that my t-tops leaked no matter what. So i decided to take apart the seal on the t-top and see whats wrong. i found that the seal wasn't "glued" in place anymore. The fix is simple and requires little skill.

Here is what the problem is... the old adhesive has dried up.



Things you need:

-Phillips screw driver (#2)

-9/32 nut driver

-Double sided adhesive gasket tape

-maybe a small flat head screw driver and small 90 deg allen wrench.

-3m Gasket adhesive. available at autozone




1) pull the clip for the handle



2) push it back into the handle. when you reinstall the handle just push it down and the clip will snap on. the handle is keyed so it only goes on 1 way



3) remove this screw at each end



4) pull up on the cover. it snaps in place.



5) remove this bolt at each end



6) carefully peel the gasket out of the tray. dont pull too hard just in case the rubber has started to tear. i'll show you how to fix that in another step



7) remove the screws inside the tray.



8) carefully pull the tray off the tops



9) peel the old gasket tape off



10) clean the trays from old adhesive and dirt.



11) separate the 2 trays



12A) as you see on the tray there is only gasket on the plastic tray and not the metal tray. I added gasket to metal tray to help seal. ( i honestly dont know how they don't leak without this extra seal)

add gasket to the metal tray where it covers the holes



12B) add gasket to the plastic tray where it covers the holes





13) assemble the 2 trays back together. make sure they fit properly together.



14) apply a bead of 3m adhesive to this area (full length)



15) mount the tray back. make sure the holes line up to the t-top before pressing the adhesive tape to teh t-top.

you can add more adhesive if it doesn't touch the tray all the way down the t-top.



16A) now for damaged gasket. simply add a little adhesive to the crack filling it and creating a seal.





17) the gasket is marked with an F for front and an L or R for left and right. make sure you put the gasket on correctly



18) apply some adhesive to the channel as shown



19) use a small flat tool to install gasket back into the tray



20) add a little adhesive as needed to seal the ends.






21) install the bolts at end of gasket, install the cover, press the handle back on. let the t-tops sit while the adhesive cures. lay the tops flat so that the adhesive doesn't run across the top like it is in the pic above.
__________________

96 Camaro Cam'd anti-Coupe
Dyno'd @ 213 RWHP (NA)
"OperationX"

Last edited by xpbr2000; 10-19-2017 at 11:41 AM.
Reply With Quote
  #2  
Old 09-06-2012, 09:33 AM
kdm212 kdm212 is offline
Another day in paradise...right?!?
LS PLUS Supporting Membership


 
Join Date: Feb 2010
Location: Ocklawaha, Florida
Rank: Captain
Posts: 2,927
Default

nice and thorough write up sir!
__________________
Thanks to Dustin for my sigpic!!!
My F-Body history: http://www.v6f-body.com/showthread.php?t=4352
Current car: http://www.v6f-body.com/showthread.php?t=4522
Reply With Quote
  #3  
Old 09-09-2012, 10:47 AM
Video's Avatar
Video Video is offline
Back in Black


 
Join Date: Jan 2012
Location: Cape Cod, MA
Rank: Sergeant Major
Posts: 1,701
Default

Looks like I got another project.
Reply With Quote

Go Back   V6 F-Body.com > Rides, Modifications & Racing > How To's
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 11:46 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2018, Jelsoft Enterprises Ltd.
2008 - 2018 V6F-Body.com